Flexible Stone Tiles

Flexible stone is an innovative material that combines the natural beauty of stone with the flexibility and ease of modern materials. Its lightweight nature and versatility make it an excellent choice for a variety of applications, both indoor and outdoor.

How to Install Flexible Stone: A Step-by-Step Guide
Before you start, make sure you have all the necessary tools and materials:
• Flexible Stone wall tiles
• Tile adhesive or mortar
• Notched trowel
• Level
• Measuring tape
• Utility knife or tile cutter
• Sponge and bucket of water
• Tile spacers (if needed)
• Grout (optional)
• Sealer (if required)

Step 1: Measuring and Cutting - Accurately measure the surface area to determine how many sheets of veneer you'll need. Use Shears or a Table Saw to cut the flexible stone veneer to fit the dimensions of your surface. Ensure cuts are clean and straight for a better fit.

Step 2: Applying Adhesive - Apply a strong tile adhesive to the surface using a sealant or caulking gun. Make sure the adhesive covers the area evenly. For best results, recommend using an adhesive like Loctite.

Step 3: Installing the Veneer - Carefully press the flexible stone veneer sheets with the adhesive, starting from one corner and working your way across. Ensure each sheet is aligned and firmly pressed to eliminate air bubbles. Use a leveling tool to ensure the veneer is even. Adjust as needed before the adhesive sets completely.

Step 4: Finishing Touches - Wipe away any excess adhesive that may have squeezed out between the veneer sheets with a damp sponge or cloth. If needed, apply a grout or sealant to the sheets. Allow the adhesive and any sealant to cure fully according to their manufacturer's instructions before exposing the surface to any stress or moisture, usually 30-50 mins.

Contact Us
For more information on our flexible stone products or installation advice, please contact us at tanya@bennetwood.com. Our team of experts is here to help you every step of the way.